manualshive.com logo in svg

Dell Inspiron 1012, Service Manual, Page: 24 / 56

Share
Download
Dell Inspiron 1012 Service Manual Download Page 24

Back to Contents Page

  

 

 Hinge Cover  

Dell™ Inspiron™ 1012 Service Manual 

 

  

Removing the Hinge Cover 

 

  

Replacing the Hinge Cover 

 

 

 

 

 

 

 

 

 

Removing the Hinge Cover  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Remove the two screws that secure the hinge cover to the computer base.  
 

  

 

 

4.

Use a plastic scribe to gently pry the hinge cover up.  
 

 

  

5.

Rotate to disengage the hinge cover tabs from the computer base.  
 

  

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

1 

plastic scribe 

2 

hinge cover 

Summary of Contents for Inspiron 1012

























































Reviews:

No comments