2.
Align the slots on the left support bracket with the alignment posts on the computer base and place the bracket in position.
3.
Replace the screw that secures the left support bracket to the computer base.
4.
Replace the display assembly (see
Replacing the Display Assembly
).
5.
Replace the hinge cover (see
Replacing the Hinge Cover
).
6.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
7.
Replace the hard-drive assembly (see
Replacing the Hard-Drive Assembly
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the battery (see
Replacing the Battery
).
Removing the Right Support Bracket
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the hard-drive assembly (see
Removing the Hard-Drive Assembly
).
5.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
6.
Remove the hinge cover (see
Removing the Hinge Cover
).
7.
Remove the display assembly (see
Replacing the Display Assembly
).
8.
Remove the screw that secures the right support bracket to the system board.
9.
Lift the right support bracket off the system board.
Replacing the Right Support Bracket
1.
Follow the procedures in
Before You Begin
.
2.
Align the slots on the right support bracket with the alignment posts on the computer base and place the bracket in position.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1
screw
2
right support bracket
Summary of Contents for Inspiron 1012
Page 37: ...Back to Contents Page ...
