Back to Contents Page
Display
Dell Inspiron M5040/15-N5040/15-N5050 Owner's Manual
Display Assembly
Display Bezel
Display Assembly
Removing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery. See
Removing the Battery
.
3.
Remove the two screws from the computer base.
4.
Follow the instructions from
step 3
to
step 8
in
Removing the Palm-Rest Assembly
.
5.
Remove the hinge cover. See
Removing the Hinge Cover
.
6.
Disconnect the display cable from the connector on the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery, see
Removing the Battery
, before working inside the computer.
