7.
Lift the display panel off the display cover.
8.
Remove the four screws (two on each side) that secure the display-panel brackets to the display panel.
9.
Turn the display panel over and place it on a clean surface.
10.
Peel and lift the tape that secures the display cable to the display-board connector and disconnect the display cable.
11.
Make a note of the display cable routing and peel the cable from the back of the display panel.
1
camera cable
2
screws (6)
3
display panel
4
display cover
5
display cable
6
Mini-Card antenna cables
1
screws (4)
2
display-panel brackets (2)
1
tape
2
display-board connector
3
display cable