Replacing the speakers
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
NOTE:
The rubber grommets may get pushed out while replacing the speaker. Ensure that the rubber grommets are in their
position after placing the speaker on the system board.
1
Using the alignment posts, place the left speaker on the computer base.
2
Route the speaker cable through the routing guides on the computer base.
3
Using the alignment posts, place the right speaker on the computer base.
4
Route the speaker cable through the routing guides on the computer base.
5
Connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 7 to step 23 in
2
Replace the
3
Replace the
.
4
Replace the
.
24
46
Replacing the speakers
Summary of Contents for G5 15
