Removing the solid-state drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•
•
Prerequisites
Remove the
Procedure
1
Remove the screw (M3x3) that secures the solid-state drive to the computer base.
2
Slide the solid-state drive from the solid-state drive slot.
3
Peel the solid-state drive shield off the solid-state drive.
9
22
Removing the solid-state drive
Summary of Contents for G5 15
