Dell EMC Integrated Data Protection Appliance DP4400 Hardware Installation Manual Download

Page: 2 / 18

Installation overview

This guide is designed for personnel who install, configure, and maintain the Integrated
Data Protection Appliance DP4400. To use this hardware publication, you should be
familiar with digital storage equipment and cabling.

Before you begin

Gather the required materials and configure your network environment as specified in

Prepare the site and unpack the system

on page 3.

Use the following sequence of actions as a guide to install the system.

Procedure

Install

and

secure

the rails.

Install the system in the cabinet

and

attach the bezel

Connect the system to the network

Connect the power cables and power on

Results

The system is ready for initial configuration. To continue setup, refer to the

Integrated

Data Protection Appliance DP4400 Getting Started Guide

. For additional help and

resources, review the information in

Additional resources

on page 16.

Hardware Installation Guide

Integrated Data Protection Appliance DP4400

2.4

Hardware Installation Guide

Summary of Contents for EMC Integrated Data Protection Appliance DP4400



















Search results

Summary of Contents for EMC Integrated Data Protection Appliance DP4400

Reviews:

Related manuals for EMC Integrated Data Protection Appliance DP4400

Brands by name

Popular brands

Dell EMC Integrated Data Protection Appliance DP4400, Hardware Installation Manual

Search results

Summary of Contents for EMC Integrated Data Protection Appliance DP4400

Reviews:

Related manuals for EMC Integrated Data Protection Appliance DP4400

Brands by name

Popular brands