remove failed: No such file or directory”
“warning: file /usr/local/dataprotection/customscripts/
Config.properties: remove failed: No such file or
directory”
11. Verify that the pre-installation patch installation completed successfully by
typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is
dataprotection-2.0.0-
571095.x86_64 or later.
12. Delete the
Idpa_pre_update_
N.N.N
.
nnnnnn
.tar.gz
file, and then delete
the
/tmp/patch/Idpa_pre_update_
N.N.N
.
nnnnnn
directory.
13. Edit the
/usr/local/dataprotection/server/version/
applianceVersion.xml
file and modify value in the <build> tag to the latest
build for the ACM and IDPA nodes.
The following example highlights the changes that you must make to the
<build> tag. In this example, the build number is 571095.
<applianceVersion>
<id>IDPA</id>
<version>
<major>2</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>
571095
</build>
</version>
<components>
<component>
<id>ACM</id>
<version>
<major>1</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>
571095
</build>
</version>
</component>
Launch the Appliance Configuration Manager
Launch the Appliance Configuration Manager to complete the initial network
configuration. The Appliance Configuration Manager (ACM) walks you through the
steps to configure network settings, license the IDPA software, and configure the
IDPA.
To continue configuring the IDPA with the ACM, refer to the
Integrated Data
Protection Appliance DP4400 Getting Started Guide
. This document explains common
user tasks such as how to create backup policies and restore from backup.
Additional resources
Document references for IDPA
The IDPA documentation set includes the following publications:
Hardware Installation Guide
16
Integrated Data Protection Appliance DP4400
2.4
Hardware Installation Guide
