Figure 17. Removing the hard drive cage
a. hard drive cage latch
b. hard drive cage guide screw (2)
c. hard drive cage
Next steps
1. Install the hard drive cage.
2. If disconnected, connect the power and data cables to the hard drives and the optical drive in the hard drive cage.
3. Install the bezel.
4. Reconnect the peripherals disconnected from the control panel assembly.
5. Follow the procedure listed in
After working inside your system
Related tasks
on page 45
Installing the hard drive cage
on page 54
on page 46
Installing the hard drive cage
Prerequisites
2. Follow the procedure listed in
Before working inside your system
3. Disconnect all peripherals connected to the control panel assembly.
4. Remove the bezel.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
54
Installing and removing system components
