Power specifications
Power supply
unit
Specification
Power rating per
power supply unit
290 W (Bronze) AC (100–240 V, 50/60 Hz, 5.4 A)
Heat dissipation
989 BTU/hr maximum (290 W power supply)
NOTE:
Heat dissipation is calculated by using the power supply wattage rating.
Voltage
100–240 V AC, autoranging, 50/60 Hz
NOTE:
This system is also designed to be connected to IT power systems with a phase-to-phase
voltage not exceeding 230 V.
Storage controller specifications
Storage
controller
Specification
Storage controller
type
PERC H730, PERC H330, PERC H830, PERC S130.
NOTE:
Your system supports software RAID S130 and a PERC card.
For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC)
documentation at Dell.com/storagecontrollermanuals.
NOTE:
The upgrade from embedded controller or Software RAID controller to Hardware RAID
controller is not supported.
Drive specifications
Hard drives
The PowerEdge T130 system supports SAS, SATA, and Nearline SAS hard drives.
Drives
Specification
Four hard drive
system
Up to four 3.5-inch, internal, cabled SATA and nearline SAS hard drives.
NOTE:
NOTE: The PowerEdge T130 does not support hard drives higher than 5 TB.
Optical drive
The PowerEdge T130 system supports one optional SATA DVD-ROM drive or DVD+/-RW drive.
Ports and connectors specifications
USB ports
The PowerEdge T130 system supports USB 2.0 and USB 3.0-compliant ports. The following table provides more information about the
USB specifications:
Technical specifications
21
