Dell E36S Series, Owner'S Manual

Page: 105 / 120

Table 19. System board jumpers and connectors (continued)
Ite
m
Connector Description
6 Slot 2 PCIE_G3_X8 CPU PCIe card connector 2
7 Slot 3 PCIE_G3_X1 PCH PCIe card connector 3
8 Slot 4 PCIE_G3_X4 PCH PCIe card connector 4
9 J_INTRU2 Intrusion connector
10 MB / Fan1 Cooling fan connector
11 J_AMEA1 iDRAC port card connector
12 A1, A2, A3, A4 Memory module sockets
13 CPU_PWR CPU power connector P2
14 CPU Processor socket
15 SATA 0–3/SATAe Mini SAS connector
16 SATA_ODD/SSD Optical disk drive connector
17 SYS_PWR System power connector P1
18 PWRD_EN Password jumper
19 J_SATA_2 SATA connector 2
20 CTRL_PNL Control panel connector
21 NVRAM_CLR NVRAM password jumper
22 CPU_FAN CPU fan connector
23 TPM Trusted platform module connector
24 IDSDM Internal dual SD module connector
25 HDD/ODD_PWR Hard drive power connector
26 BP_SIG Backplane signal connector
System board jumper settings
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
For information about resetting the password jumper to disable a password, see the Disabling A Forgotten Password section.
Table 20. System Board Jumper settings
Jumper Setting Description
PWRD_EN
(default)
The password feature is enabled (pins 1–2).
The password feature is disabled (pins 2–3).
NVRAM_CLR
(default)
The configuration settings are retained at system boot (pins 2–3).
The configuration settings are cleared at the next system boot. (pins 1–
2).
Jumpers and connectors 105