•
Hold transparencies by the edges. Flex and fan the transparencies to loosen them. Straighten the edges on a
level surface.
Note:
Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex and fan the stack of envelopes to loosen them. Straighten the edges on a level surface.
5
Load the paper or specialty media.
Note:
Slide the stack gently into the multipurpose feeder until it comes to a stop.
•
Load only one size and type of paper or specialty media at a time.
•
Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
•
There are different ways of loading letterhead depending on whether an optional staple finisher is installed or
not.
Without an optional staple finisher With an optional staple finisher
One
‑
sided printing
One
‑
sided printing
Two
‑
sided printing
Two
‑
sided printing
Loading paper and specialty media
58
