Dell B5460dn Mono Laser Printer User Manual Download Page 57

Page: 57 / 233

Pull the multipurpose feeder extender.

Note:

Guide the extender gently so that the multipurpose feeder is fully extended and open.

Slide the width guide to the correct position for the size of the paper being loaded.

Note:

Use the paper size indicators on the bottom of the tray to help position the guides.

Prepare the paper or specialty media for loading.

•

Flex and fan the sheets to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

Loading paper and specialty media

Summary of Contents for B5460dn Mono Laser Printer










































































































































































































































Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews:

Related manuals for B5460dn Mono Laser Printer

Brands by name

Popular brands

Dell B5460dn Mono Laser Printer, User Manual

Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews:

Related manuals for B5460dn Mono Laser Printer

Brands by name

Popular brands