Dell B5460dn Mono Laser Printer User Manual Download Page 13

Page: 13 / 233

Indicator light color and its corresponding printer status

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blinking green

The printer is warming up, processing data, or printing.

Solid green

The printer is on, but idle.

Blinking red

The printer requires user intervention.

Sleep button light color and its corresponding printer status

Sleep button light

Printer status

Off

The printer is idle or in Ready state.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is waking from or entering Hibernate mode.

Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in pulsing
pattern

The printer is in Hibernate mode.

Learning about the printer

Summary of Contents for B5460dn Mono Laser Printer










































































































































































































































Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews:

Related manuals for B5460dn Mono Laser Printer

Brands by name

Popular brands

Dell B5460dn Mono Laser Printer, User Manual

Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews:

Related manuals for B5460dn Mono Laser Printer

Brands by name

Popular brands