Not enough free space in flash memory for resources [52]
Try one or more of the following:
•
From the printer control panel, press
to clear the message and continue printing.
•
Delete fonts, macros, and other data stored in the flash memory.
From the printer control panel, navigate to:
>
Settings
>
>
Settings
>
>
Print Settings
>
>
Utilities Menu
>
>
Format Flash
>
>
Yes
>
•
Use a larger
‑
capacity flash memory card.
Note:
Downloaded fonts and macros that are not stored in the flash memory are deleted when the printer is turned
off or restarted.
PPDS font error [50]
Try one or more of the following:
•
From the printer control panel, press
to clear the message and continue printing.
•
If the printer cannot find the requested font, then navigate to:
>
Settings
>
>
Settings
>
Print Settings
>
>
PPDS menu
>
>
Best Fit
>
>
On
>
The printer finds a similar font and reformats the affected text.
•
Cancel the current print job.
Paper changes needed
Try one or more of the following:
•
From the printer control panel, select
Prompt for each page
to continue printing.
•
Select
Use current supplies
to continue printing using the paper loaded in the tray.
•
Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•
From the printer control panel, select
Continue
to clear the message and continue printing.
The printer discards any data received through the parallel port.
•
Select
Reset active bin
to reset the bin for a linked set of bins.
Troubleshooting
182
