Dell B5460dn Mono Laser Printer User Manual Download Page 159

Page: 159 / 233

Close the rear door.

From the printer control panel, select

Next

Clear the jam, press OK

to clear the message and continue

printing.

[x]

‑

page jam, remove standard bin jam. [203]

Firmly grasp the jammed paper on each side, and then gently pull it out.

Note:

Make sure all paper fragments are removed.

From the printer control panel, select

Next

Clear the jam, press OK

to clear the message and continue

printing.

[x]

‑

page jam, open upper and lower rear door. [231–234]

CAUTION—HOT SURFACE:

The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Clearing jams

159

Summary of Contents for B5460dn Mono Laser Printer










































































































































































































































Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews:

Dell B5460dn Mono Laser Printer, User Manual, Page: 159 / 233

Search results

Summary of Contents for B5460dn Mono Laser Printer

Reviews: