6. Remove the
solid-state drive from M.2 slot one
7. Remove the
solid-state drive from M.2 slot two
8. Follow the procedure from step 1 to step 4 in
, if applicable.
9. Remove the
solid-state drive from M.2 slot three
10. Remove the
solid-state drive from M.2 slot four
, if applicable.
11. Remove the
solid-state drive interposer board
12. Remove the
13. Remove the
14. Remove the
.
15. Remove the
16. Remove the
.
17. Remove the
.
About this task
The following image indicates the connectors on the bottom side of your system board.
1. Power-button board cable
The following image indicates the connectors on the top side of your system board.
1. Coin-cell battery cable
2. Card-reader board cable
66