Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Solid-state drive—M.2 slot two
Removing the M.2 2280 solid-state drive from M.2 slot two
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
About this task
NOTE: This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in M.2 slot two.
NOTE: Depending on the configuration ordered, the computer may have up to four M.2 solid-state drive installed. The
solid-state drive configurations that are supported on M.2 slot two are as follows:
• M.2 2230 solid-state drive
• M.2 2280 solid-state drive
The following image indicates the location of the M.2 2280 solid-state drive in M.2 slot two and provides a visual representation of
the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the thermal shield and the solid-state drive to the computer base.
2. Slide and lift the thermal shield from the computer base.
3. Slide and remove the M.2 2280 solid-state drive from the M.2 solid-state drive slot on the system board.
23
