Dell 5WC10, Installation And Service Manual

Page: 52 / 166

Option Description
UEFI HTTP
Settings
Options Description
HTTP Device (n =
1 to 4) Enables or disables the device. When enabled, a UEFI HTTP boot option is created
for the device.
HTTP Device n
Settings (n = 1 to
4) Enables you to control the configuration of the HTTP device.
UEFI iSCSI
Settings Enables you to control the configuration of the iSCSI device.
Table 29. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN
format.
iSCSI Device1 Enables or disables the iSCSI device. When
disabled, a UEFI boot option is created for the
iSCSI device automatically. This is set to
Disabled by default.
iSCSI Device1 Settings Enables you to control the configuration of the
iSCSI device.
TLS
Authentication
Configuration View and/or modify this device's boot TLS authentication mode. None means the HTTP server and the
client will not authenticate each other for this boot. One way means the HTTP server will be
authenticated by the client, while the client will not be authenticated by the server. This option is set to
None by default.
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video
controller, integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS .
4. On the System BIOS screen, click Integrated Devices .
Integrated Devices details
About this task
The Integrated Devices screen details are explained as follows:
52 Pre-operating system management applications