Figure 58. Installing a NVMe drive bay or flex bay
Next steps
1.
Install the backplane to the NVMe drive bay or flex bay
.
2. Connect the slim optical drive and the back plane cables.
3. Follow the procedure listed in
After working inside your system
on page 67.
Optical drives and tape drives
Optical drives and tape drives specifications
Your system supports one of the following configurations:
Table 35. System configurations
System
Configurations
Eight 3.5 inch drives or sixteen 2.5 inch drives
Up to two SATA slim optical drives and one SAS tape drive
Sixteen 2.5 inch drives and eight NVMe drives
One SATA slim optical drive
Systems with up to eighteen 3.5 inch drives
One SATA slim optical drive or one SAS tape drive
Systems with up to thirty-two 2.5 inch drives
One SATA slim optical drive
Removing the optical or tape drive blank
Prerequisites
1. Follow the safety guidelines listed in
on page 66.
2. Follow the procedure listed in
Before working inside your system
3. If installed,
.
Installing and removing system components
101
Summary of Contents for 5WC10
Page 21: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 21 ...
Page 22: ...Figure 17 Electrical overview 22 Dell EMC PowerEdge T640 overview ...
Page 23: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 19 System tasks 24 Dell EMC PowerEdge T640 overview ...
