Input requirements
●
Supply voltage: –(48–60) V DC
●
Current consumption: 32 A (maximum)
Kit contents
●
Dell part number 6RYJ9 terminal block or equivalent (1)
●
#6-32 nut equipped with lock washer (1)
Required tools
Wire-stripper pliers capable of removing insulation from size 10 AWG solid or stranded, insulated copper wire.
NOTE:
Use alpha wire part number 3080 or equivalent (65/30 stranding).
Required wires
●
One UL 10 AWG, 2 m maximum (stranded) black wire [–(48–60) V DC].
●
One UL 10 AWG, 2 m maximum (stranded) red wire (V DC return).
●
One UL 10 AWG, 2 m maximum, green with a yellow stripe, stranded wire (safety ground).
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in
on page 66.
2. Turn off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
4. If installed,
.
5. Place the system on a flat, stable surface.
Steps
1. Turn the latch release lock to the unlocked position.
2. Press the cover release latch and remove the system cover.
86
Installing and removing system components
Summary of Contents for 5WC10
Page 21: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 21 ...
Page 22: ...Figure 17 Electrical overview 22 Dell EMC PowerEdge T640 overview ...
Page 23: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 19 System tasks 24 Dell EMC PowerEdge T640 overview ...
