Installing the PCIe holder
1
Align and place the PCIe holder to the system chassis.
2
Press the holder back until it clicks to the system.
3
Install the:
a
4
Follow the procedure in
After working inside your computer
.
Heat sink and CPU fan assembly
Removing the heat sink and CPU fan assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the heat sink and CPU fan assembly:
a Disconnect the CPU fan cable [1] from the system board.
b Loosen the four heat sink captive screws [2], in the diagonal order (4, 3, 2, 1).
c Gently lift the heat sink and CPU fan assembly [3] from the system.
NOTE:
Lay the assembly with the thermal grease facing up.
Removing and installing components
45
Summary of Contents for 5820
Page 1: ...Dell Precision 5820 Tower Owner s Manual Regulatory Model D02T Regulatory Type D02T002 ...
Page 21: ...b Slide the slim ODD out of the system Removing and installing components 21 ...
Page 23: ...b Lift the bezel from the chassis Removing and installing components 23 ...
