5
Lift the cover to remove it from the system.
Installing the side cover
1
First hold and align the bottom of the side cover to the chassis.
2
Ensure that the hook on the bottom of the side cover snaps into the notch on the system.
3
Press the system cover until it clicks into place.
CAUTION:
The system will not power on without the side cover. Also, the system will shut down if the side cover is removed
while the system is on.
4
Follow the procedure in
After working inside your computer
12
Removing and installing components
Summary of Contents for 5820
Page 1: ...Dell Precision 5820 Tower Owner s Manual Regulatory Model D02T Regulatory Type D02T002 ...
Page 21: ...b Slide the slim ODD out of the system Removing and installing components 21 ...
Page 23: ...b Lift the bezel from the chassis Removing and installing components 23 ...
