Installing the internal chassis speaker
1
Press and hold the tabs on either side of the intrusion speaker, and slide the speaker module into the slot to secure it to the system.
2
Connect the internal chassis speaker cable to the connector on the system chassis.
3
Install the:
a
b
c
4
Follow the procedure in
After working inside your computer
Air shroud
Removing the air shroud
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the air shroud:
a Press in the securing tabs by holding the air shroud from both the ends, and then lift the air shroud from the system.
Removing and installing components
35
Summary of Contents for 5820
Page 1: ...Dell Precision 5820 Tower Owner s Manual Regulatory Model D02T Regulatory Type D02T002 ...
Page 21: ...b Slide the slim ODD out of the system Removing and installing components 21 ...
Page 23: ...b Lift the bezel from the chassis Removing and installing components 23 ...
