Installing the front bezel
1
Hold the bezel and ensure that the hooks on the bezel snap into the notches on the system.
2
Rotate the bezel forward and press the front bezel until the tabs click into place.
3
Follow the procedure in
After working inside your computer
.
Hard Disk Drive bezel
Removing HDD bezel
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the HDD bezel:
a Press the blue unlock button [1] on the edge of ODD bay.
b Slide the latch [2] to the unlock position, on the front I/O bezel.
c Rotate forward and lift the HDD bezel [3] away from the system.
Removing and installing components
15
Summary of Contents for 5820
Page 1: ...Dell Precision 5820 Tower Owner s Manual Regulatory Model D02T Regulatory Type D02T002 ...
Page 21: ...b Slide the slim ODD out of the system Removing and installing components 21 ...
Page 23: ...b Lift the bezel from the chassis Removing and installing components 23 ...
