Dell 5820 Owner'S Manual Download Page 88

Page: 88 / 96

Software

This chapter details the supported operating systems along with instructions on how to install the drivers.

Topics:

•

Supported operating systems

•

Downloading drivers

•

Chipset drivers

•

Graphics controller driver

•

•

•

•

•

Storage controller drivers

•

Other drivers

Supported operating systems

Table 20. Operating systems

Windows 10

•

Factory installed Windows 10 Pro— 64-bit

•

Factory installed Win 10 Enterprise—64-bit*

Windows 7

Windows 7 Pro— 64-bit*

Linux

•

RHEL 7.3*

•

Ubuntu 16.04

•

NeoKylin v6.0*

NOTE:

Asterisk(*): means that "Only supported on systems with Xeon W Series CPUs.

Downloading drivers

Turn on the computer.

Go to

Dell.com/support

Click

Product Support

, enter the Service Tag of your system, and then click

Submit

NOTE:

If you do not have the Service Tag, use the auto detect feature or manually browse for your system model.

Click

Drivers and Downloads

Select the operating system installed on your system.

Scroll down the page and select the driver to install.

Click

Download File

to download the driver for your system.

After the download is complete, navigate to the folder where you saved the driver file.

Software

Summary of Contents for 5820

































































































Search results

Summary of Contents for 5820

Reviews:

Related manuals for 5820

Brands by name

Popular brands

Dell 5820, Owner'S Manual

Search results

Summary of Contents for 5820

Reviews:

Related manuals for 5820

Brands by name

Popular brands