Dell 5210n Mono Laser Printer User Manual Download

Page: 93 / 150

Slide the lower tabs on the tray into the lower slots on the output expander.

Rotate the tray up until the upper tabs

snap

into the upper slots.

If you are not attaching any more print media handling options, attach the top cover to the output expander.

Installing an Envelope Feeder

The envelope feeder attaches to the front of your printer behind the multipurpose feeder. It can be removed when you are not using it, making the printer
more compact.

Pull on the notch on the front of the printer to lower the multipurpose feeder.

Lift open the envelope feeder connector door.

Align the tabs on the envelope feeder with the slots on both sides of the printer, and then gently push the envelope feeder into the opening until it

snaps

into place.

Summary of Contents for 5210n Mono Laser Printer























































































































































Search results

Summary of Contents for 5210n Mono Laser Printer

Reviews:

Related manuals for 5210n Mono Laser Printer

Brands by name

Popular brands

Dell 5210n Mono Laser Printer, User Manual

Search results

Summary of Contents for 5210n Mono Laser Printer

Reviews:

Related manuals for 5210n Mono Laser Printer

Brands by name

Popular brands