Understanding the Operator Panel Messages
The printer operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This
chapter provides a list of all printer messages, explains what they mean, and tells you how to clear the messages.
The following table lists the messages in alphanumerical order. You can also locate a message using the index.
Message
Action
30 Invalid refill, change cartridge
Install a new cartridge.
For more information, see
Replacing the Toner Cartridge
.
31 Replace defective print cartridge
Remove the print cartridge, and install a new one.
For more information, see
Replacing the Toner Cartridge
.
32 Replace unsupported
print cartridge
Remove the print cartridge, and install a supported one.
For more information, see
Replacing the Toner Cartridge
.
32 Replace unsupported toner
cartridge
Remove the toner cartridge, and install a supported one.
For more information, see
Replacing the Toner Cartridge
.
34 Short Paper
l
Press the
Select
button
to clear the message and continue printing.
The printer does not automatically reprint the page that prompted the message.
l
Check tray length and width guides to ensure paper is properly fitted in the tray.
l
Make sure the print job is requesting the correct size of paper.
l
Adjust the
Paper Size
setting for the size paper you are using.
If
MP Feeder Size
is set to
Universal
, make sure the paper is large enough for the formatted data.
l
Cancel the current job.
35 Insufficient memory to support
Resource Save feature
l
Press the
Select
button
to disable
Resource Save
and continue printing.
l
To enable
Resource Save
after you get this message:
¡
Make sure the link buffers are set to
Auto
, then exit the menus to activate the link buffer changes.
¡
When
Ready
is displayed, enable
Resource Save
.
l
Install additional memory. For more information, see
Installing Printer Memory
.
37 Insufficient memory to collate job
l
Press the
Select
button
to print the portion of the job already stored and begin collating the rest of the
job.
l
Cancel the current job.
37 Insufficient memory for Flash
Memory Defragment operation
l
Press the
Select
button
to stop the defragment operation and continue printing.
l
Delete fonts, macros, and other data in printer memory.
l
Install additional printer memory. For more information, see
Installing Printer Memory
.
37 Insufficient memory, some held
jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the
Down
arrow button
until
appears next to
Continue
, then press the
Select
button
to clear the
message.
38 Memory Full
l
Press the
Select
button
to clear the message and continue printing.
The job may not print correctly.
l
Cancel the current job.
l
Install additional printer memory. For more information, see
Installing Printer Memory
.
39 Page is too complex to print
l
Press the
Select
button
to clear the message and continue printing.
The job may not print correctly.
l
Cancel the current job.
l
Install additional printer memory. For more information, see
Installing Printer Memory
.
50 PPDS font error
l
Press the
Select
button
to clear the message and continue printing.
The job may not print correctly.
l
Cancel the current job.
Summary of Contents for 5210n Mono Laser Printer
Page 99: ......
