background image

5.

Press the arrow keys to select 

CD-ROM

, and press <Enter>. 

 

6.

When the 

Press any key to boot from CD

 message appears, press any key. 

 

Windows XP Setup 

1.

When the 

Windows XP Setup

 screen appears, press <Enter> to select 

To set up Windows now

 

2.

Read the information on the 

Microsoft Windows Licensing Agreement

 screen, and press <F8> to accept the license agreement. 

 

3.

If your computer already has Windows XP installed and you want to recover your current Windows XP data, type 

r

 to select the repair option, and 

remove the CD.  
 

4.

If you want to install a new copy of Windows XP, press <Esc> to select that option. 
 

5.

Press <Enter> to select the highlighted partition (recommended), and follow the instructions on the screen. 
 

The 

Windows XP Setup

 screen appears, and the operating system begins to copy files and install the devices. The computer automatically restarts 

multiple times. 

6.

When the 

Regional and Language Options 

screen appears, select the settings for your location and click 

Next

 

7.

Enter your name and organization (optional) in the 

Personalize Your Software 

screen, and click 

Next

 

8.

At the 

Computer Name and Administrator Password

 window, enter a name for your computer (or accept the one provided) and a password, and click 

Next

 

9.

If the 

Modem Dialing Information

 screen appears, enter the requested information and click 

Next

 

10.

Enter the date, time, and time zone in the

 Date and Time Settings

 window, and click 

Next

 

11.

If the 

Networking Settings

 screen appears, click 

Typical

 and click 

Next

 

12.

If you are reinstalling Windows XP Professional and you are prompted to provide further information regarding your network configuration, enter your 
selections. If you are unsure of your settings, accept the default selections.  
 

Windows XP installs the operating system components and configures the computer. The computer automatically restarts. 

13.

When the 

Welcome to Microsoft

 screen appears, click 

Next

 

14.

When the 

How will this computer connect to the Internet?

 message appears, click 

Skip

.  

 

15.

When the 

Ready to register with Microsoft? 

screen appears, select 

No, not at this time

 and click 

Next

 

16.

When the 

Who will use this computer?

 screen appears, you can enter up to five users.  

 

17.

Click 

Next

 

18.

Click 

Finish 

to complete the setup, and remove the CD. 

 

19.

Reinstall the appropriate 

drivers

 with the 

Drivers and Utilities

 CD. 

 

20.

Reinstall your virus protection software. 
 

21.

Reinstall your programs. 
 

Notebook System Software (NSS) 

 

 

NOTE: 

The time required to complete the setup depends on the size of the hard drive and the speed of your computer.

NOTICE: 

Do not press any key when the following message appears: 

Press any key to boot from the CD

NOTICE: 

Do not press any key when the following message appears: 

Press any key to boot from the CD.

 

NOTE: 

To reinstall and activate your Microsoft Office or Microsoft Works Suite programs, you need the Product Key number located on the back of the 

Microsoft Office or Microsoft Works Suite CD sleeve.

If you reinstall the operating system for your Dell™ computer, it is also recommended to reinstall the NSS utility. The utility is available on the optional 

Drivers 

and Utilities

 CD and on the Dell Support website at 

support.dell.com

.  

 

 

To download the utility, go to 

Downloads

 at 

support.dell.com 

and select your computer model from the drop-down menu. Under 

Select Your Download 

Category

, select 

System and Configuration Utilities

, select your operating system and language, and then follow the instructions. 

 

 

NSS provides critical updates for your operating system and support for Dell™ 3.5

-inch USB floppy drives, Intel

®

 Pentium

® 

M processors, Intel Celeron

® 

processors, optical drives, and USB devices. NSS is necessary for the correct operation of your Dell computer. The software automatically detects your 
computer and operating system and installs the updates appropriate for your configuration. 

 

 

NOTE: 

NSS is critical for the correct operation of USB devices.

Summary of Contents for 510D












































































































Reviews: