Dell 510D, User Manual

Page: 7 / 107

The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off.
air vents — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
Bottom View
memory module cover — Covers the compartment that contains the memory module(s). See " Adding and Replacing Parts ."
battery-bay latch release — Releases the battery. See " Using a Battery " for instructions.
CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an
incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid
damaging the cable.
NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer.
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment,
such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.
1 memory module cover 5 docking device slot
2 battery-bay latch release 6 fan
3 battery charge gauge 7 Mini PCI card cover
4 battery 8 hard drive