2.
Turn the computer over so that it is upright.
3.
Open the display approximately 2.54 cm (1 in).
4.
Pull the hard drive out of the computer.
5.
Remove the new drive from its packaging.
Save the original packaging for use when storing or shipping the hard drive.
6.
Ensure that the display is still open approximately 2.54 cm (1 inch).
7.
Press the hard drive cover into the bay until it is fully seated in the bay.
8.
Turn the computer over. Use a small screwdriver to tighten the screw.
9.
Use the
Operating System
CD to
install the operating system
for your computer.
10.
Use the
Drivers and Utilities
CD to install the drivers and utilities for your computer.
1 M3 x 5-mm screws (2)
NOTICE:
You cannot remove your hard drive unless you open your display first.
NOTICE:
When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in your
Product Information Guide
."
NOTICE:
Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the hard
drive connector.
NOTE:
The Operating System CD is optional and may not ship with your computer.
NOTE:
The
Drivers and Utilities
CD is optional and may not ship with your computer.
Summary of Contents for 510D
Page 10: ...Company name Dell Inc One Dell Way Round Rock Texas 78682 USA 512 338 4400 ...
Page 28: ...8 Click Apply 9 Click OK ...
Page 36: ......
Page 97: ......