Dell 3330 User Manual Download

Page: 61 / 160

Press the down arrow button until

Reports

appears, and then press

Press the down arrow button until

Print Directory

appears, and then press

After the directory list prints,

Ready

appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

Turn the printer off.

Hold down

and the right arrow button while turning the printer on.

Release the buttons when the clock appears, and wait for

CONFIG MENU

to appear.

Press the down arrow button until

Prt Quality Pgs

appears, and then press

The print quality test pages print.

Press the down arrow button until

Exit Config Menu

appears, and then press .

Resetting the Printer

appears briefly, followed by a clock, and then

Ready

appears.

Canceling a print job

Canceling a print job from the printer control panel

If the job is formatting or already printing, and

Cancel a job

appears on the first line of the display:

Press the arrow buttons until

Cancel

appears.

A list of jobs appears.

Press the arrow buttons until

appears next to the job you want to cancel, and then press .

Note:

Once a print job is sent, to easily cancel a job, press

. The

Stopped

screen appears. Press the arrow buttons

until

Cancel a job

appears, and then press .

Canceling a print job from the computer

To cancel a print job, do one of the following:

For Windows users

Click

, or click

Start

and then click

Run

In the Start Search or Run box, type

control printers

Press

Enter

, or click

The printer folder opens.

Double-click the printer icon.

Printing

Summary of Contents for 3330

































































































































































Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands

Dell 3330, User Manual

Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands