Dell 3330 User Manual Download

Page: 50 / 160

Paper type

Standard 250-sheet
tray

Optional tray

Multipurpose feeder Duplex path

Transparencies

Envelopes (smooth)

Single-sided paper labels designed for laser printers are supported for occasional use. It is recommended to print no

more than 20 pages of paper labels a month. Vinyl, pharmacy, and dual-sided labels are not supported.

Use envelopes that lie flat when individually placed on a table facedown.

Paper capacities

The capacities of the trays and the multipurpose feeder are based on 75 g/m

(20 lb) paper.

Load up to

Notes

Tray 1

250 sheets of paper

150 sheets of A6-size paper

50 paper labels

50 transparencies

Note:

Vinyl, pharmacy, or dual-sided labels are not supported. Use

paper labels only. Single-sided paper labels designed for laser
printers are supported for occasional use. It is recommended to
print no more than 20 pages of paper labels per month.

Tray 2

550 sheets of paper

50 paper labels

Note:

Only one optional drawer may be installed on the printer at

a time.

Multipurpose feeder

50 sheets of paper

15 paper labels
10 transparencies

10 sheets of card stock

7 envelopes

Note:

Feed paper into the multipurpose feeder only to the point

where its leading edge can contact the paper guides. Do not force
the paper into the feeder.

Paper and specialty media guidelines

Summary of Contents for 3330

































































































































































Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands

Dell 3330, User Manual

Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands