Dell 3330 User Manual Download

Page: 135 / 160

To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:

Using the Embedded Web Server

Type the printer IP address into the address field of your Web browser.

Note:

If you do not know the IP address of the printer, then print a network setup page and locate the IP address

in the TCP/IP section.

Click

Settings

, and then click

General Settings

Click

Timeouts

In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.

Click

Submit

Using the printer control panel

Make sure the printer is on and

Ready

appears.

Press

Press the arrow buttons until

Settings

appears, and then press .

Press the arrow buttons until

General Settings

appears, and then press .

Press the arrow buttons until

Timeouts

appears, and then press .

Press the arrow buttons until

Power Saver

appears, and then press .

Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver
mode, and then press

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be
changed, added, or unjammed.

To set up e-mail alerts:

Type the printer IP address into the address field of your Web browser.

Note:

If you do not know the IP address of the printer, then print a network setup page and locate the IP address

in the TCP/IP section.

Click

Settings

Under Other Settings, click

E-mail Alert Setup

Select the items for notification, and type in the e-mail addresses.

Click

Submit

Note:

See your system support person to set up the e-mail server.

Administrative support

135

Summary of Contents for 3330

































































































































































Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands

Dell 3330, User Manual

Search results

Summary of Contents for 3330

Reviews:

Related manuals for 3330

Brands by name

Popular brands