Dell 3100cn - Color Laser Printer User Manual Download Page 94

Page: 94 / 219

Type the printer name to be registered with the system.

10.

Specify the directory to install the utility. To install into

/usr/local/dellbin3100cn

, press the <Enter> key. To change the directory, specify one.

11.

If this utility has been installed earlier, the user will be prompted whether to overwrite the earlier version.

12.

If the server input at step 5 the printer connected by the network, type <

>. If the server and the printer are connected locally, type <

13.

When the other filters have been registered in your workstation, the following message appears. Type <

The software installation is complete.

Operation on HP-UX

Installation Procedure

Insert the

Drivers and Utilities

CD into the CD-ROM drive of the local workstation.

Log on as a root account and extract the installation script from the

Drivers and Utilities

CD.

Type

./install.sh

and run the installer.

Select the printer model to install.

Specify the directory to install the utility.

Type the name of the output printer. Type

delllp3100cn

. Type the printer name to be registered with the system.

Type the logical printer name. Register

dell3100cn

. Type a printer name that has not already been registered with the system.

The utility will be installed in the directory specified at step 5. Registration will be executed here so that the logical printer registered at step 7 can

Enter printer-name? [dell3100cn] : dell3100cn

Printer-name is 'dell3100cn' (y/n)[y] : y

Enter Binary directory name? [/usr/local/dellbin3100cn] :

directory is '/usr/local/dellbin3100cn' (y/n)[n] : y

'dell3100cn'is network printer?:(y/n)[y] : y

Do you want remove 'XXXXXX' filter and re-install (y/n) [y]

NOTICE:

When the printing settings are modified or changed by the Administration Tool (admintool) after the installation, printing may not work.

NOTE:

The host name of the output printer which you want to specify in step 6 must be pre-registered with a

sam

command.

NOTICE:

If you have no root privilege, contact your system administrator.

# mount -F cdfs -o cdcase /dev/dsk/c1t2d0 /cdrom

# cd /tmp

# cp /cdrom/UNIXFilter/HP-UX/UXFILTER.tar /tmp

# tar xvf UXFILTER.tar

NOTE:

/dev/ds/clt2d0 is an example. Specify the CD-ROM device file for all workstations.

# ./install.sh

Printer Model ?

1. Dell Laser Printer 3100cn

2. Exit

Enter Process No (1/2)? : 1

Enter install directory name /usr/local/dellbin3100cn] :

directory is '/usr/local/dellbin3100cn' (y/n)[n]: y

Enter output-printer-name? : delllp3100cn

output-printer-name is 'delllp3100cn' (y/n)[y]: y

NOTE:

The registered printer name can be verified by executing

lpstat -v

Enter logical-printer-name? : dell3100cn

Printer-name is 'dell3100cn' (y/n)[y]: y

Summary of Contents for 3100cn - Color Laser Printer




























































































































































































































Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Brands by name

Popular brands

Dell 3100cn - Color Laser Printer, User Manual

Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Brands by name

Popular brands