Dell 3100cn - Color Laser Printer User Manual Download Page 92

Page: 92 / 219

Solaris

Setup the printer and network.

Insert the

Drivers and Utilities

CD into the local workstation.

Run the installer and begin the installation.

Print for testing the printer.

HP-UX

Setup the printer and network.

Insert the

Drivers and Utilities

CD into the local workstation.

Run the installer and begin the installation.

Print for testing the printer.

Operation on Linux

Installation of Software

Insert the

Drivers and Utilities

CD in the CD-ROM drive of the local workstation.

If CD-ROM drive is not mounted on your workstation, extract files by using another workstation that has a CD-ROM drive to transfer those files to your
workstation.

Log on as a root account and extract the installation script from the

Drivers and Utilities

CD.

Type

./install.sh

and run the installer.

Select the printer model to install.

It asks whether you want to install the filter. Type <y>.

The disk status on the workstation appears. 20 MB of free disk space is required for the installation of the filter.

Specify the directory to install the filter. To install into

/usr/local/dellbin3100cn

, press the <Enter> key. To change the directory, specify one. Change

the directory to.

Confirm the directory to be installed.

The software installation is complete.

Setting the Printer

Write printer setting in

/etc/printcap

/etc/printcap.local

referencing

/usr/local/dellbin3100cn/printcap.sample

Linux (LPRng):

NOTICE:

If you have no root privilege, contact your system administrator.

# mount /dev/cdrom /mnt/cdrom

# cd /tmp

# cp /mnt/cdrom/UNIXFilter/Linux/UXFILTER.tar /tmp

# tar xvf ./UXFILTER.tar

NOTE:

CD-ROM is sometimes mounted automatically.

#./install.sh

Printer Model?

1. Dell Laser Printer 3100cn

2. Exit

Enter Process No(1/2)? : 1

Install Filter? (y/n) [y] : y

NOTE:

If [ ] appears in a message, the default value will appear inside the [ ]. It will be selected when you press the <Enter> key.

Enter Library directory name [/usr/local/dellbin3100cn]

directory is '/usr/local/dellbin3100cn' (y/n)[n] : y

Summary of Contents for 3100cn - Color Laser Printer




























































































































































































































Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Brands by name

Popular brands

Dell 3100cn - Color Laser Printer, User Manual

Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Brands by name

Popular brands