manualshive.com logo in svg

Dell 3100cn - Color Laser Printer, User Manual

Share
Download
Dell 3100cn - Color Laser Printer User Manual Download Page 37

To specify PostScript communication protocol for each interface. You can configure 

Adobe Protocol

 settings for 

Network

. 

 

 

The change becomes effective after the printer is turned off and then on again. 

 

 

Values:

 

 

USB 

 

 

Use the 

USB

 menu to change printer settings affecting a USB port. 

Adobe Protocol 

 

 

Purpose:

 

 

 

To specify PostScript communication protocol for USB interface. 

 

 

The change becomes effective after the printer is turned off and then on again. 

 

 

Values:

 

 

 

 

PCL 

 

 

Use the 

PCL

 to change printer settings that only affect jobs using the PCL emulation printer language. 

Input Tray 

 

 

Purpose:

 

 

 

To specify the input tray. 

Auto* 

Used when auto-detecting the PostScript communication protocol. 

RAW 

Used when no special processing is required for data. 

Standard 

Used when the communication protocol is in ASCII interface. 

BCP 

Used when the communication protocol is in binary format. 

TBCP 

Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. 

Auto* 

Used when auto-detecting the PostScript communication protocol. 

RAW 

Used when no special processing is required for data. 

Standard 

Used when the communication protocol is in ASCII interface. 

BCP 

Used when the communication protocol is in binary format. 

TBCP 

Used when the communication protocol supports both ASCII and binary data to switch between them according to the specified control code. 

NOTE: 

Values marked by an asterisk (*) are the factory default menu settings.

Summary of Contents for 3100cn - Color Laser Printer




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands