Dell 3100cn - Color Laser Printer User Manual Download Page 36

Page: 36 / 219

Purpose:

To configure the IPX/SPX settings.

The change becomes effective after the printer is turned off and then on again.

Values:

IP Filter

Purpose:

To specify the reception of data from certain IP addresses for blocking. You can set up to five IP addresses.

The change becomes effective after the printer is turned off and then on again.

Values:

Init NVRAM

Purpose:

To initialize network data stored in NVRAM.

Adobe Protocol

Purpose:

Auto*

Automatically sets the frame type.

Ethernet II

Uses the Ethernet frame type.

Ethernet 802.3

Uses the IEEE802.3 frame type.

Ethernet 802.2

Uses the IEEE802.3/IEEE802.2 frame type.

Ethernet SNAP

Use the IEEE802.3/IEEE802.2/SNAP frame type.

NOTE:

The

IPX/SPX

menu is only displayed when an optional multi protocol card is installed on the printer.

Filter

(

is 1 to 5.)

Address

Sets the IP address for Filter

Mask

Sets the mask for Filter

Mode Off*

Disable the IP Filter feature for Filter

Accepts an access from specified IP address.

Reject

Rejects an access from specified IP address.

Summary of Contents for 3100cn - Color Laser Printer




























































































































































































































Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Related manuals for 3100cn - Color Laser Printer

Brands by name

Popular brands

Dell 3100cn - Color Laser Printer, User Manual

Search results

Summary of Contents for 3100cn - Color Laser Printer

Reviews:

Related manuals for 3100cn - Color Laser Printer

Brands by name

Popular brands