Dell 3100cn - Color Laser Printer, User Manual

Page: 76 / 219

11. Now press MENU to get back to
Tray Settings/Paper Size
.
12. Press to get to
Paper Type
.
13. Press to select
Paper Type
.
14. Press to get to
MPF
.
15. Press to select
MPF
.
16. Using and , select the appropriate paper type (Plain 1).
17. Press SELECT , once Plain 1 is displayed on the lower line.
18. Now we have the MPF Type set to Plain 1.
19. Now press MENU to get back to
Ready to Print
20. Now insert the Envelope-sized stack of paper into the MPF.
21. On the screen
MPF/Envelope
will appear. (ONLY ON 3x00cn)
22. Press SELECT to confirm this. (ONLY ON 3x00cn)
23. Now on the screen
MPF/Plain 1
will appear.
24. Press SELECT to confirm this.
25. We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go File
®
Print and then click the
Properties button, you will get this same driver properties window.
26. Open up Word and create a new document.
27. Go to File
®
Print .
28. Select the
Dell Color Laser Printer
from the printers list
29. Click the Properties button to the right.
30. This brings up Driver Properties.
31. Click on the
Paper Tray
Tab.
32. Change the Paper Source to
MPF
.
33. Click the
Paper
Tab.
34. Select in
paper size
,
Transparency
.
35. Select for
Output Size
,
Same as Paper Size
.
36. Click OK .
37. Click Close .
38. Now the printer driver is setup correctly.
39. Now go to File ® Page Setup .
40. Click the
Paper
Tab.
41. Change Paper Size to Legal.
42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43. Click OK .
44. Type in some gibberish in the body of the document and click Print!
Setup Paper Size
1. Start Here
2. On the printer press MENU .
3. Press to get to
Tray Settings
.
4. Press to select
Tray Settings
.
5. Press to get to
Paper Size
.
6. Press to select
Paper Size
.
7. Press to get to
MPF
.
8. Press to select
MPF
.
9. Using and , select the appropriate paper size (Letter).
10. Press the middle button, SELECT , once Letter is displayed on the lower line, this puts a * by it.