Dell 3100cn - Color Laser Printer User Manual Download Page 62 | Manualshive

Page: 62 / 219

background image

Removing Optional Tray Modules

1.

Turn off the printer and unplug the printer power cable.

2.

Unlock the tray from the printer by removing the tray from the tray module and turning the locking mechanism, inside the printer, as shown in the
graphic.

3.

Remove the printer from the tray.

4.

To unlock the trays, loosen the screws with a coin and remove them from the inside of the tray.

CAUTION:

To lift the printer safely and replace the optional 250-sheet tray module or 500-sheet tray module requires two people to stand in

front (operator panel side) and behind the printer and to lift at the same time. Do not try to lift the printer from the sides.

CAUTION:

Make sure your fingers are not under the printer when you set it down.

NOTE:

You can use a maximum of two trays with your printer (the standard 250-sheet tray module and one additional 250-sheet tray module or 500-

sheet tray module).

CAUTION:

Lift the printer with two people, one facing the front of the printer (operator panel side) and the other facing the back. Never try to lift

the printer while facing its right and left sides.

«
...
60
61
62
63
64
...
»

Summary of Contents for 3100cn - Color Laser Printer




























































































































































































































Reviews:

No comments

Related manuals for 3100cn - Color Laser Printer

Brand: NCR Pages: 10

Brand: Xiamen Hanin Electronic Technology Pages: 62

Brand: A&D Pages: 24

INFOPRINT HI-LITE COLOR 4005-HC2

Brand: IBM Pages: 10

Brand: Oki Pages: 276

Brand: Brightek Pages: 8

Brand: Lexmark Pages: 79

Brand: Oki Pages: 271

apeosport-v c5585

Brand: Fuji Xerox Pages: 493

Brand: Intermec Pages: 2

Brand: M&R Pages: 36

4650NX - SuperScript Color Laser Printer

Brand: NEC Pages: 74

Brand: HandTop Pages: 97

Brand: Canon Pages: 76

BJC 6000 - Color Inkjet Printer

Brand: Canon Pages: 174

Brand: Canon Pages: 118

Brand: Canon Pages: 77

Brand: Canon Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands