Dell 302-004-341, Manual

Page: 35 / 70

Figure 1 PowerEdge R640 and R740xd PCI slots, integrated NICs and BMC port locations
iDRAC
Integrated
NICs
BMC
(iDRAC)
1
3
Integrated
NICs
BMC
(iDRAC)
1 2 3
4 5 6 7 8
2
Data cables are connected to two switches, for high availability, via the nodes' 10 G or
25 G ports. Management interfaces are connected to a switch on a separate
management network using onboard and BMC (iDRAC) ports.
The BMC (iDRAC) IP address can reside on a different subnet and/or VLAN, and the
only requirement from the BMC (iDRAC) side is that the AMS (when used) must have
a routable IP Path to the BMC (iDRAC) IP address on the node.
PowerEdge R640 and R740xd port designations - Windows
Server node port designations in a Windows-based ScaleIO system.
Connect the cables and configure the system as shown in the following tables,
depending on the server type and (architecture, when relevant).
Note
In Storage-Only configurations, the customer ports can be used as additional data
ports.
PowerEdge R740xd Servers
Port Configuration
PowerEdge R640 and R740xd port designations - Windows 35