Dell 1955, Hardware Owner'S Manual

Page: 95 / 160

Installing System Options
95
Figure 3-24. Removing and Installing the Chassis Control Panel Assembly
Installing the Chassis Control Panel
CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1
Place the control-panel cable in its retaining clips. See Figure 3-24.
2
Install the control-panel midplane receptacle:
a
Ensure that the securing arm on the control-panel midplane receptacle is open.
b
Place the control-panel midplane receptacle into its bay and push it forward until it is fully seated.
c
Lower the securing arm on the control-panel midplane receptacle until it locks in place.
3
Install the chassis control panel assembly:
a
Place the control panel in its bay so it lays flat.
b
Slide the control panel forward until its securing tab locks in place.
1 midplane receptacle 2 securing-arm release button 3 securing arm
4 control-panel cable 5 control-panel securing tab 6 control panel
6
5
1
2 3
4
front