Dell 1815 Mono Laser Service Manual Download Page 74

Page: 74 / 152

If the document is jammed in the paper exit area:

a. Open the document cover and turn the release knob

to remove the misfed documents from the document

document output tray.

b. Close the document cover. Then load the documents

back into the ADF.

2. If you cannot see the paper or the paper does not

move when you pulled, open the document cover.

3. Turn the release knob so that you can easily seize the

misfed document, and remove the document from the

roller or the feed area by carefully pulling it gently to

the right.

4. Close the document cover. Then load the documents

back into the ADF.

Service Manual

Alignment & Adjustments

6-4

Summary of Contents for 1815 Mono Laser

























































































































































Search results

Summary of Contents for 1815 Mono Laser

Reviews:

Related manuals for 1815 Mono Laser

Brands by name

Popular brands

Dell 1815 Mono Laser, Service Manual

Search results

Summary of Contents for 1815 Mono Laser

Reviews:

Related manuals for 1815 Mono Laser

Brands by name

Popular brands