Table 6 Drive indicator codes (continued)
Drive status indicator code
Condition
Flashes green for three seconds, amber for
three seconds, and then turns off after six
seconds
Rebuild stopped.
X400H and X400F front drive replacement
This section describes how to replace the front drives in slots 0-11 in an X400H capacity cube or an
X400F capacity cube.
Removing the drive
Before you begin
1. Follow the
.
2. Identify the faulted drive by checking the
in the Alerts and Events
>
Appliance tab in
the PowerProtect Data Manager UI. Note down the node ID (for example, Capacity cube 06)
and the drive number.
3.
.
Procedure
1. Press the release button to open the drive release handle.
2. Holding the handle, slide the drive out of the drive slot.
Figure 17 Removing a drive
After you finish
1.
X400 capacity cube CRU procedures
PowerProtect X400 Appliance Customer Replaceable Unit (CRU) Procedures
31
