Network Settings screen details
The
Network Settings
screen details are explained as follows:
About this task
Option
Description
UEFI PXE
Settings
Options
Description
PXE Device n (n
= 1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created
for the device.
PXE Device n
Settings(n = 1 to
4)
Enables you to control the configuration of the PXE device.
UEFI HTTP
Settings
Options
Description
HTTP Device (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI HTTP boot option is created
for the device.
HTTP Device n
Settings (n = 1 to
4)
Enables you to control the configuration of the HTTP device.
TLS
Authentication
Configuration
View and/or modify this device's boot TLS authentication mode.
None
means the HTTP server and the
client will not authenticate each other for this boot.
One way
means the HTTP server will be
authenticated by the client, while the client will not be authenticated by the server. This option is set to
None
by default.
Integrated Devices
You can use the
Integrated Devices
screen to view and configure the settings of all integrated devices including the video
controller, integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the
Integrated Devices
screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the
System Setup Main Menu
screen, click
System BIOS
.
4. On the
System BIOS
screen, click
Integrated Devices
.
Integrated Devices details
About this task
The
Integrated Devices
screen details are explained as follows:
Pre-operating system management applications
33
