•
Hex nut driver-5 mm
Removing the system from the enclosure
Prerequisites
1
Follow the safety guidelines listed in
2
Turn off the system.
3
Before removing the half-height systems from the bays 11 or 12 of the enclosure, rotate the LCD panel to the storage position to
prevent accidental damage to the LCD screen.
CAUTION:
To prevent damage to the I/O connectors, do not touch connectors or the connector pins.
CAUTION:
To protect the I/O connector pins, install the I/O connector covers every time a system is removed from the
enclosure.
Steps
1
Press the release button on the system handle and simultaneously pull the system handle to unlock the system from the enclosure.
2
Holding the system handle, slide the system out of the enclosure.
NOTE:
Ensure that you do not lift the system by using only the system handle.
Figure 7. Removing the system from the enclosure
3
Install the I/O connector cover over the I/O connector.
48
Installing and removing system components
