Figure 47. Installing the system battery
Next steps
1
Install the following:
a
b
2
Follow the procedure listed in
After working inside your system
.
3
Enter the System Setup to confirm that the battery is operating properly.
4
Enter the correct time and date in the System Setup's
Time
and
Date
fields.
5
Exit the System Setup.
6
To test the newly installed battery, remove the system from the enclosure, for at least an hour.
7
Reinstall the system into the enclosure, after an hour.
8
Enter the System Setup and if the time and date are still incorrect, see the Getting help section.
Optional internal USB memory key
NOTE:
To locate the internal USB port on the system board, see the
System board jumpers and connectors
section.
Replacing optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of the USB memory
key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
90
Installing and removing system components
