manualshive.com logo in svg

Dell EMC Inspiron 3671, Service Manual

The Dell EMC Inspiron 3671 Service Manual can be downloaded for free from our website. This comprehensive manual provides step-by-step instructions and detailed information on how to use and maintain your Inspiron 3671. Visit manualshive.com today to easily access and download this handy manual.

Share
Download
background image

Removing the system board

NOTE: 

Before working inside your computer, read the safety information that shipped with your computer and follow 

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After 

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/regulatory_compliance

.

NOTE: 

Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup 

program after you replace the system board.

NOTE: 

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You 

must make the appropriate changes again after you replace the system board.

NOTE: 

Before disconnecting the cables from the system board, note the location of the connectors so that you can 

reconnect the cables correctly after you replace the system board.

Prerequisites

1. Remove the 

computer cover

.

2. Remove the 

front bezel

.

3. Remove the 

memory module

.

4. Remove the 

solid-state drive/Intel Optane memory

.

5. Remove the 

graphics card

.

6. Remove the 

wireless card

.

7. Remove the 

processor fan and heat-sink assembly

.

8. Remove the 

processor

.

Procedure

NOTE: 

Note the routing of all cables as you remove them so that you can reroute them correctly after you replace the 

system board. For information on system board connectors, see “

System board components

’.

NOTE: 

Depending on the configuration ordered your computer may have up to two 2.5-inch hard drives installed. If only 

one hard drive is installed skip step 3 or step 5 where applicable.

1. Disconnect the processor-power cable from the system board (ATX CPU).
2. Disconnect the optical-drive data cable from the system board (SATA 2).
3. Disconnect the hard-drive data cable from the system board (SATA 1).
4. Disconnect the hard-drive cable from the system board (SATA 0).
5. Disconnect the hard-drive data cable from the system board (SATA 3).
6. Disconnect the hard-drive power cable from the system board (SATA PWR).
7. Disconnect the hard-drive power cables from the system board (SATA PWR).
8. Disconnect the power-supply unit cable (P1) from the system board (ATX SYS).

34

50

Removing the system board

Summary of Contents for Inspiron 3671










































































Reviews:

No comments

Related manuals for Inspiron 3671

Ace c3700 - Workstation Manual preview
c3700 - Workstation
Brand: Ace Pages: 21
IBASE Technology MPT-1000R User Manual preview
MPT-1000R
Brand: IBASE Technology Pages: 80
Kontron KISS 4U V3 User Manual preview
KISS 4U V3
Brand: Kontron Pages: 72
Alienware Area-51 R5 Setup And Speci?Cations preview
Area-51 R5
Brand: Alienware Pages: 21
Alera ALE-AEWR2B Manual preview
ALE-AEWR2B
Brand: Alera Pages: 12
Neousys Technology NRU Series User Manual preview
NRU Series
Brand: Neousys Technology Pages: 73
Moxa Technologies MC-7270-MP-T Quick Installation Manual preview
MC-7270-MP-T
Brand: Moxa Technologies Pages: 2
Vivo DESK-V000EB Instruction Manual preview
DESK-V000EB
Brand: Vivo Pages: 3
IPSO -LSG MICRO 9 User Manual preview
-LSG MICRO 9
Brand: IPSO Pages: 41
HACH LANGE TitraLab KF1121 Basic User Manual preview
TitraLab KF1121
Brand: HACH LANGE Pages: 432
MSI B450M PRO-VDH MAX Manual preview
B450M PRO-VDH MAX
Brand: MSI Pages: 34
Intel NUC8i7HNK User Manual preview
NUC8i7HNK
Brand: Intel Pages: 11
iDOT BeOS Series User Handbook Manual preview
BeOS Series
Brand: iDOT Pages: 30
IBM Aptiva 2158 Hardware Maintenance Service preview
Aptiva 2158
Brand: IBM Pages: 222
IBM PC 300 Guías Del Usuario Manual preview
PC 300
Brand: IBM Pages: 240
Acer PW.NAT05.002 User Manual preview
PW.NAT05.002
Brand: Acer Pages: 72
Acer Aspire T135 Manuel D'Utilisation preview
Aspire T135
Brand: Acer Pages: 24
Stealth SVPC-19 Installation Manual preview
SVPC-19
Brand: Stealth Pages: 5

Brands by name

Popular brands

Load more brands