Dell EMC Inspiron 3671 Service Manual Download

Page: 11 / 73

Screw list

NOTE:

When removing screws from a component, it is recommended to note the screw type, the quantity of screws,

and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.

NOTE:

Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when

replacing a component.

NOTE:

Screw color may vary with the configuration ordered.

Table 1. Screw list

Component

Secured to

Screw type

Quantity

Screw image

Computer cover

Chassis

#6-32x6.35

Solid-state drive/Intel
Optane memory

System board

M2x3.5

Card-retention bracket

Chassis

#6-32x6.35

Wireless card

System board

M2x3.5

Power-supply unit

Chassis

#6-32x6.35

3.5-inch hard drive

Chassis

#6-32x3.6

2.5-inch hard drive(s)

NOTE:

Depending

on the
configuration
ordered, there may
be up to two 2.5-
inch hard drives
installed.

Chassis

M3x3.5

2-4

Optical drive

Chassis

M2x2

Front-I/O bracket

Chassis

#6-32x6.35

System board

Chassis

#6-32x6.35

Screw list

Summary of Contents for Inspiron 3671










































































Search results

Summary of Contents for Inspiron 3671

Reviews:

Related manuals for Inspiron 3671

Brands by name

Popular brands

Dell EMC Inspiron 3671, Service Manual

Search results

Summary of Contents for Inspiron 3671

Reviews:

Related manuals for Inspiron 3671

Brands by name

Popular brands