Dell EMC Inspiron 3671 Service Manual Download Page 66

Page: 66 / 73

Table 13. System setup options—Wireless menu

Wireless

Wireless Device Enable

Enable or disable internal wireless devices.

•

WLAN/WiGig

(default)

•

Bluetooth

(default)

Table 14. System setup options—Maintenance menu

Maintenance

Service Tag

Display the Service Tag of your computer.

Asset Tag

Create a computer Asset Tag.

SERR Messages

Control the SERR message mechanism. Some graphics cards require the SERR
message.

By default,

Enable SERR Messages

is selected.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

By default,

Allows BIOS Downgrade

is selected.

Data Wipe

Enable to securely erase data from all internal storage devices.

By default,

Wipe on Next Boot

is not selected.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a recovered
file on the user primary hard drive.

By default,

BIOS Recovery from Hard Drive

is selected.

First Power On Date

Set the date on which the computer is switched on (for ownership record).

By default,

Set Ownership Date

is not selected.

Table 15. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Table 16. System setup options—Advanced configurations menu

System Logs

ASPM

Set the Active State Power Management (ASPM) level.

•

Auto

(default)

•

Disabled

•

L1 Only

Table 17. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and
for the Dell OS Recovery tool.

•

OFF

•

(default)

•

SupportAssist OS Recovery

Enable or disable the boot flow for the SupportAssist OS Recovery tool when certain
system errors.

By default,

SupportAssist OS Recovery

is selected.

BIOSConnect

Enable or disable the cloud Service OS upon absence of Local OS Recovery..

System setup

Summary of Contents for Inspiron 3671










































































Search results

Summary of Contents for Inspiron 3671

Reviews:

Related manuals for Inspiron 3671

Brands by name

Popular brands

Dell EMC Inspiron 3671, Service Manual

Search results

Summary of Contents for Inspiron 3671

Reviews:

Related manuals for Inspiron 3671

Brands by name

Popular brands